New from SPL comes these spherical front lower control arm bushings for the 350Z. The inner bushings in particular have proven problematic for the Z33 chassis. On my own car, we found they were torn, which caused some very slight clunking up front and vague steering response. It had been that way for so long, I almost began to think that was just how it was. With the car up in the air when we did the last cornerbalance/alignment, we found they were totally shot! We’ve had many customers report similar issues as well, with mileage ranging from only 7500, to upwards of 90k +, so it’s going to be just one of those things on this car.
SPL’s new solution is a solid spherical bushing to replace the factory soft rubber units. These are made up of QA1 slot-loaded bearings that feature a unique slot-loaded injection molded kevlar liner that cannot “pound out” when dirt gets on the bearing ball, providing a self cleaning and self lubricating bearing that is suitable for street use. Large 3/4″ size bearing offers huge load capacity and long life. Highly precise (machined to 1/1000th inch) CNC machined 6061 aluminum bearing shell and sleeves provide excellent fit and finish.
Priced at $149 per set of inners or outers, or $298 for all of them. Order off the website (just click the picture above) and get free shipping in the 48 states. If you need a combo deal with any of SPL’s other items (or any items in general), just let us know!
Kwame
Z1 Performance
Jonathan
Corner Balance 
I have a G35 and the local nissan dealership says I have to replace the entire lower control arm up front because the bushings cant be replaced but the 350Z arms are a direct match. Does that mean I can use these for my G? Thanx
yes these would fit directly