I finally ordered the clutch and L.S.D. for my build a few weeks ago and they both arrived at our shop yesterday.
For the clutch I went with the O.S. Giken STR2CD, because I honestly have no patience for obnoxious clutches on a street driven car. This clutch should have no problem holding the torque that I expect my motor to output. As I write this it is already in transit to my machinist/motor builder to be balanced with my crank.
I weighed it and its 32lbs for the complete clutch and flywheel assembly.
It’s so pretty…
I also made sure to grab a O.S. Super Lock Limited Slip Differential while I was at it.
Kwame
Z1 Performance
Jonathan
Corner Balance 
Leave a Reply