Tag Archives: 911 Turbo

The German Invasion

16 Jun

Zee Germans made a solid showing this morning as well. Several of the rarer beasts from deep in the Black Forest are shown. Unfortunately none of the rarer Audi’s or Mercedes were in attendance, but nevertheless there were some amazing treasures there.

20130616-143045.jpg

20130616-143106.jpg

20130616-143122.jpg

20130616-143140.jpg

20130616-143154.jpg

20130616-143208.jpg

20130616-143244.jpg

20130616-143314.jpg

20130616-143350.jpg

20130616-143437.jpg

20130616-143458.jpg

20130616-143526.jpg

20130616-143543.jpg

20130616-143721.jpg

Advertisements

Spotted: Rarified Weapon of Choice

15 Jun

20130615-190853.jpg

20130615-190905.jpg

20130615-190924.jpg

Lots of Porsche content lately – primarily because there is such a wide array of purpose built cars in their long history. Here is another one: the GT2. While not quite the widow-maker the previous version was, it’s never-the-less a wild machine and extremely rare. The attention to detail on this thing is amazing..like the carbon inlay in the dash flanked by red stitching. This continues through the interior.

Sterling Silver

2 Dec

porsche964turbo

Just something about a clean, deep silver car. It’s industrial looking, purposeful looking, sporty, yet still luxurious. Those hips aren’t bad to look at either….
#porsche

Merging of Classics

9 Jul


Classic Porsche + Work Brombacher wheels = something that will look good 20 years from now. Not a trend, not a hip-today look, but something that endures. That’s what modifying a car should be all about, but often, is not. Contact us for all your Work Wheel needs at z1sales@z1auto.com

Classic Z1 – Part 1: Drag me to Hell

1 Nov

Over a series of posts, we’ll take a look back to where Z1 Performance began.  We’ll chronicle some of the projects, and events from back in the day and share some old photos and stories along the way.

Z1 Performance, the brainchild of a few die-hard Datsun fanatics, saw Adam’s 1979 280ZX as a veritable guinea pig in a project that would strive to blend old school and new in a timeless package.

Mike was the owner of Z1 at the time and an experienced mechanic.  Along with Billy (an equally knowledgeable tech) they had been restoring, repairing, modifying and racing Z-cars for years prior.  They had the experience, parts and knowledge required to get this project off the ground.  Together with Adam’s vision, they targeted the ultimate street car of the time; the 993 911 Turbo, capable of running mid 12-second 1/4 runs with a full interior, A/C, and stereo.

This ZX was not destined to be a trailer queen.  Rather, it would be a fully functioning daily driver as comfortable cruising to work as it was on the drag strip.  As the project grew legs, progress was made quickly.  It wasn’t long before we were all spending Friday nights at Long Island Dragway for test-and-tune.  The boys would have hours to make countless runs, note changes and results.

Phase 1 was simple: Turbocharge the higher compression N/A 280zx motor using OEM Datsun turbo parts along with a rising rate adjustable fuel pressure regulator.

Phase 2 required the stronger Turbo motor’s internals, a front mount intercooler (Starion core) high flow fuel pump, larger turbo and a programmable ECU (Electromotive TEC II).

Phase 3 would bring along a fully built motor, aggressive cam, massive injectors, larger turbo and intercooler plus loads more boost.

Once armed with the ECU, Adam scoped out the few dyno’s available in the area at the time and gain some experience tuning the L series for boost.  We’ll have to search for dyno sheets!

Success wasn’t always the name of the game, and driving the ZX to and from events and testing would often mean long nights prepping and repairing.  I recall one particular test session at LI dragway when the original N/A tranny finally let go…after perhaps one run.  After a tow back to the shop (and a large bill), Mike and Bill had another tranny bolted up in under and hour and we drowned our sorrows with pizza and beer.

Through it all, we built not only fast cars, but solid friendships that would stand the test of time.  While Mike and Bill have since moved on to other careers, they are still very much a part of the Z1 family and continue to offer their assistance, experience and knowledge in their free time.

LI Drag1

Is it a prybar or a boost controller?

LI Drag3

Likely waiting for an authentic LI Dragway hotdog in between runs

LI Drag2

Sitting pretty!

LI Drag4

There we go!

LI Drag7

That's right, a brushed aluminum gas cap in '96. Z1, setting trends!

LI Drag8

Compensating for something?

Atco1

Now that's competition!

Atco2

Would this be called "attack mode?"

Atco3

Who won the holeshot?

Atco4

Niiiiice!

Z1 Dyno 1

On the dyno, after a quick stop at the airport for jet fuel! No joke.

Z1 Dyno

Again...

Mike

All of it, impossible without this man (Mike). That hat was stlyin in '96!