Tag Archives: cusco rebuild

Replace and Upgrade your Blown Cusco Zero2R’s

9 May

zero2rdamperreplace

As many have found out, Cusco discontinued their Zero2R coilovers. As such, replacement parts can no longer be obtained.

However, all hope is not lost! Cusco phased out the Zero2R and replaced them with the superior Zero3R. The 3R is 24 way adjustable vs 5 way adjustable from the old versions.

We have a kit that includes all the items you’ll need for the upgrade. The shocks are sold in pairs only, to ensure proper balance, and pricing is the same as the older Zero2R’s were!

To ensure compatibility, contact z1sales@z1auto.com with the following info:

1. Year, Make, Model of your car
2. Original part # – this can be found on the original Cusco damper, right on the upper portion of the casing.
3. Inner diameter of springs

Cost for the PAIR of replacement dampers is $1025.00 delivered anywhere in the 48 states, and where required, will include any ancillary hardware to make it a complete, direct, bolt on affair.

Advertisements

Exedy, Cusco, Repair/Rebuild Parts for Hyper Single, Twin Disk, Carbon and Triple Disk Clutches

30 Nov

exedyrebuilddiagram

Did you know that your Exedy and Cusco Racing Hyper Single, Twin, and Triple Disk even Carbon disk clutch was rebuildable? If it’s slipping, or if it’s getting up there in age/mileage/abuse and you want to avoid a problem before it happens, you’ve come to the right place. We can offer the full range of Exedy rebuild parts for all their clutch kits. Disks, intermediate plates, half engage rings, throw out bearing, pressure plates, friction ring – you name it! Since I spent part of today researching rebuild parts for a client’s MR2 Turbo, I figured this was a good opportunity to make this post too!

Contact z1sales@z1auto.com and we’ll be happy to assist, no matter which Exedy or Cusco kit you’ve got.