Tag Archives: flow form

More Bigger (JDM Wheel Content Inside!)

21 Nov

Work has also announced new 19 inch sizes for 2013 for the CR Ultimate Kiwami’s as well!

The 19″ CR Ultimate will be available in various widths, including 19×8.5, 19×9.5, 19×10.5, and a 19×11.0. Offsets available are shown on the sizing chart above.

Standard bolt pattern includes 5×114.3 or 5×100, with custom bolt pattern available in the 5×100 through 5×120 range. Therefore, popular European vehicle bolt patterns (such as 5×112 and 5×120) are available for this wheel. Available finishes include Matte Bronze (AHG), Matte Black (MBL), White (WHT), or GT Silver (GTS).

In addition to excellent widths and a variety of offset choices, this 19″ sizing will also feature an ULTRA DEEP CONCAVE FACE, which is available on the 19×10.5 + 19×11.0 sizing. Other sizing will feature a DEEP CONCAVE FACE (19×9.5) or a MIDDLE CONCAVE FACE (19×8.5).

Big brake clearance is excellent for this wheel, as it was designed to clear many large brake kits, including factory kits such as the OE Akebono (370Z/G37), OE Brembo (Evo 8/9/10), OE Brembo (STI), and many others. The wheel can also clear aftermarket big brake kits. Due to the variety of sizing and caliper design between aftermarket brake companies, please always feel free to verify clearance with us first.

Optional center caps include the current four styles: Flat Type Silver, Flat Type Black, Low Type Silver, and Low Type Black. Wheels are proudly made in Japan to the highest quality standards.

Contact z1sales@z1auto.com for details

Work Emotion 11RF-T

14 Jan

Brand new for 2011, we are proud to announce a special edition WORK Emotion 11R-FT that is exclusive to WORK Wheels USA. Featuring Matte Gray Silver (MGS) Finish & Matte Gunmetal (MGM) Finish, there is also upgraded sizing, including a long awaited 18×10.5 sizing!

Available only through WORK Wheels USA & our WORK Wheels Authorized Dealers!

This WORK Emotion 11R-FT utlizes WORK Flowforming Technology, also known as spun forming here in the U.S. Sizes range from 17 inch to 18 inch.

The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use or at area where there are smoother roads.

Unlike our competitors’ flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting.

Low-pressure cast construction has a denser material property over gravity cast wheels, thus allowing a greater strength advantage over gravity cast with flow-forming barrel.

Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, the Emotion 11R-FT is available with semi-concave or deep concave face. Some specs are BBK friendly.

1) 18×10.5 Sizing: The 11R-FT is the first Emotion series to have a 10.5″ width in the 18″ sizing.

2) USA Exclusive Finishes: Matte Gray Silver (MGS) & Matte Gunmetal (MGM) are standard finishes on this Emotion 11R-FT.

3) WORK Flowforming Technology (spun forming): The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use or at area where there are smoother roads. Unlike our competitors’ flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting.

4) Big Brake Clearance: Due to the design of the 11R-FT, it is very brake friendly to large OEM calipers along with many aftermarket calipers.

5) Reduced Weight: By using WORK Flowforming Technology, WORK Wheels was able to save on average ~2.2 lbs. per wheel, while maintaining the engineering strength and integrity.

Optional center cap available (sold separately).

Sport decal sheet available (sold separately).