More JDM Goodies for Your CT9A

Tomei has just announced their Titanium Exhaust for the Evo 7-9, as well as an optional Titanium Test Pipe.

Click here for preorder specials!

Advertisement

Tomei Titanium Catback + Test Pipe Evo X!!

Brand new from Tomei Japan comes their titanium competition exhaust for the Evo X. The main priorities were for overall engine performance gains as opposed to just maximum peak power. The tubes size and length was carefully selected to suit each engine characteristics and to suit the cars chassis as well for maximum torque, response, and exhaust flow efficiency through the layout. It is difficult to increase the power on the EVO X with the muffler alone but this design has optimized in all ar as. The use of Titanium material with the single piping layout also helped reduced the overall weight of 15.65kg! This amazing weight reduction helps with the cars performance and handling whilst maintaining strength that Titanium.

Features:

1. Muffler Section – φ115 t=1mm design with straight cut finish racing for a fantastic look. Laser etched logo and beautiful heat gradation gives the EXPREME Ti a good visual appeal.

2. Muffler Mounting Band – Made from stainless steel the band this band is designed as a support band instead of having is welded to the actual muffler. This keeps both separated and greatly reduces stress from vibration that would usually be present if the support was welded directly to the muffler. The band is also fitted with a special high heatproof spacer rubber for increased stress reduction from vibrations.

3. Mounting Clamps – Rather than the conventional worm type clamps, Tomei uses T bolt clamps as it provides double the clamping force even under harsh conditions. This band is best suited for extreme conditions from high heat stress and vibrations this will firmly keep the pipes air tightly sealed together.

4. Resonator Casing – All of the Φ152 t = 1mm Titanium design achieves the optimum exhaust efficiency and straight design, finished off with a mirror finish plate with the embossed logo and heat gradation color for that lasting impression.

5. Resonator Internals – The all Titanium made inner mesh tube is t=1mm φ3 P=5mm with an open slot ratio of 32.6%. With maximum weight reduction and exhaust flow being the key points you can expect the best flow rate with an addictive racing sound from this exhaust without any compromise. Unlike the usual conventional short fiberglass threads, the use of the long fiberglass thread wool was chosen for its excellent sound absorbing and excellent durability to cope with high pressure and high temperatures.

6. Spring Mounted Joints – The hook anchor points allows the springs to firmly hold the pipes together which is sufficient as it is alone but the use of the clamp bands adds that extra guarantee for a secure fitment for a reliable joint. Just like you find on very high end racing headers

7. Mid Pipe – The main purpose for this product is for pure competition performance exhaust efficiency so the racing layout design was made with bare minimum bends as possible over the entire Φ80mm t=1mm Titanium piping and the 3 piece for ease of installation and weight reduction.

8. Mid Pipe Flange – The flange was made from a 6.0mm plate for strength design purposes to minimize distortions and cracks from aging to guarantee strength. This keeps the light weight design yet maintains strength equal to the factory stock design and guarantees the sealing characteristics that is required.

Optional Titanium test pipe sold separately!

Contact us for availability

To order yours, click here!!

Cobb Tuning EVO X Downpipe & Test Pipe

Man this new EVO X is getting the attention it deserves from product manufacturers…

Let us know if you are interested in this or any other Cobb or EVO X part.