Solid Differential Bushing Kit 350Z and G35

Click the picture for details and pricing.

Torque Solution continues to push the limits of high performance aftermarket products with our “NEW” Nissan 350z & G35 Differential Mount. This system was designed to reduce movement of the rear differential. This helps to improve transmission feedback when shifting, and gives the car a more solid feel under hard acceleration. By replacing the OEM rubber with these solid billet pieces you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

– Improved 60fts / e.t’s
– Reduced Wheel Hop
– Eliminates excessive rearend slop
– Reduces rear end float under acceleration
– Solid feeling gear changes
– Street and track torture tested
– Anodized Black 6061 Billet
– Bushing Driver Tool Included to Ease Install
– Lifetime Warranty
– Made in USA

Advertisement

Urethane Exhaust Hanger Set 350Z/G35

These urethane exhaust hangers replace the factory soft rubber units found on the 350Z and G35 coupe. They are a direct fit, and will limit the movement exhibited by the stock hangers. These are great for those running true dual exhausts, or for those who’s factory mounts have become worn due to age or high mileage. Sold as a complete set. Priced at $54 shipped in all 50 states. To order just shoot us an email to z1sales@z1auto.com

Transmission Member Bushings WRX/STi

Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket shifter bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our products with a lifetime warranty.

• Improved 60fts / e.t’s
• Installs in under 30 Minutes in your garage
• Eliminates excessive Shifter play
• Solid feeling gear changes
• Street and track torture tested
• 75A durometer polyurethane
• Lifetime Warranty
• Made in USA

To order, contact us at z1sales@z1auto.com

EGR Delete Kit for Evo 8/9

If you’re after maximum power with minimal plumbing, for those doing drag/track days with their car who have no need for the factory EGR setup, read on!

Delete your factory EGR with this simple Billet EGR Block off plate.. These come with countersunk recessed screws for a nice clean look.

Features:

Installs in under 15 minutes
Made out of lightweight 6061-T6 billet aluminum
Black anodized / Torque Solution Laser engraved
Lifetime Warranty
Made in USA

Priced at $19.95 + shipping

To order contact us at z1sales@z1auto.com or (631)863-3820.

Billet/Urethane Transmission Mount Version 2.0

About a year and a half ago we began offering our own billet transmission mount for the 350Z/G35. It was a good success but availability was a constant issue, so we chose to discontinue it. Well, we’re happy to announce we now can offer a new version of the mount, as produced by Torque Solutions. We’ll be listing their full product range on our site shortly, but figured we would start here.

This mount is a MUST HAVE for any 2003-2008 350Z. A Z is not a cheap car to mod, and truly worthwhile mods are hard to come by. For $109.00, and an easy DIY install that takes less than an hour, this is a no brainer. This mount will instantly improve shifter feel, get rid of all the sloppiness in your lever, and give a much more positive action when going through the gears.

For the time being, it’s being offered in 90A durometer only, which is very stiff, and will cause some NVH. We’re seeing if we can bring back our popular 60A and 75A versions, and will update this post if we’re successful.

In the meantime, to order just drop us a line at z1sales@z1auto.com

Thanks!